Product
Contact Us
Tel:+86-010-58858988
Fax:+86-010-58858516
E-Mail: steven@fibridge.com
Address:A402, Power Creative Building, No.1, Shangdi East Rd, Haidian District, Beijing, 100085, PR CHINA
Network & Comm

STM-1 EoS

STM-1 EoS

Brand name: Fibridge

 

Product introduction

Introduction:  

1
Overview
F10-155SB is the STM-1 level multi-service Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform. With optional cards such as E1 card, Ethernet card and Engineering Order Wire card (EOW), it is easy to meet user’s various requirements. It provides fully cross connectivity between all tributaries, and can be used as a Terminal Multiplexer (TM) or an Add-Drop-Multiplexer (ADM) to build point-to-point, ring and chain transmission network.

2Typical Application

Ring Topology

Tree/Chain Topology

 

3Features

●1U height, 19 Inch width standard ,1 main board with 3 service card slots
●Service interface
 Two STM-1 optical interfaces, SFP optical module
 Maximum 16 E1 interfaces compliant with ITU-T G.703 (8 per card), optional unbalanced/ balanced interfaces
 Maximum four 10/100Mb/s Ethernet electric interfaces(4 per card); Or maximum two 10/100/1000Mb/s Ethernet electric interfaces(2 per card); Or maximum one 100/1000Mb/s Ethernet optical interface(1 per card)
●System interface
 Ethernet management interface: EMU (RJ45 connector)
 RS232 network management interface: CONSOLE (RJ45 connector)
 RS232 user channel interface: RS232 (RJ45 connector)
 External synchronization interface / Extendable management interface : ETS1/EXM1, ETS2/EXM2 (RJ45 connector)
 EOW interface: PHONE (RJ11 connector)
 UALM and DALM output interface: U/DALMO (DB9 connector)
●Timing mode
 STM-1 line timing (T11,T12)
 Tributary timing from E1-1 to E1-16 (T2)
 External timing source input (T31/T32), 2048Kbit/s by default and 2048KHz selectable
 External timing output (T41/T42), 2048Kbit/s by default and 2048KHz selectable
 ITU-T G.813 internal oscillator
 The timing source can be auto-switched according to SSM or operator settings
●Ethernet functionality
 Generic Framing Procedure GFP-F compliant with ITU-T G.7041
 VCAT compliant with ITU-T G.707 and LCAS compliant with ITU-T G.7042
 Ethernet flow control on WAN port and LAN port
 Frame Length(maximum):1552 bytes
 Auto-negotiation of LAN port
●Supports 1+1 path protection and Automatic Protect Switch (APS) with switching time less than 50ms
●Supports Remote power Down Detection (RPD) and Auto Laser Shutdown (ALS)
●Supports embedded BERT and various loop back for troubleshooting
●Supports firmware download locally without disturbance of existing traffic
●NE management
 Supports NE management based on CLI command via RS232 interface or TELNET; CLI supports local management only, it cannot manage the remote NE
 Supports RAYVIEW network management software based on SNMP protocol
●Two hot-spare power cards, both 220V AC and -48VDC are available, power consumption less than 15W

4Ordering Information

F10-155SB-S04243FA-2
       Standalone STM-1, 4x10/100Mbps Eth, 1+1 optic, single power module

F10-155SB8-S04243FA-2H
       Standalone STM-1, 4x10/100Mbps Eth, 8E1, 120ohm, 1+1 optic, single power module

F10-155SB16-W04227CA-2
       Standalone STM-1, 2x10/100/1000Mbps Eth, 16E1, single-strand 1+1 optic, single power module

 

 

Copyright © 2015 Beijing Fibridge Co,.Ltd. All Rights reserved
Tel:+86-010-58858988 Fax:+86-010-58858516 E-Mail:steven@fibridge.com