Product
Contact Us
Tel:+86-010-58858988
Fax:+86-010-58858516
E-Mail: steven@fibridge.com
Address:A402, Power Creative Building, No.1, Shangdi East Rd, Haidian District, Beijing, 100085, PR CHINA
Network & Comm

Copper/Optical Ethernet to single E1 Converter

Copper/Optical Ethernet to single E1 Converter

Brand name: Fibridge

Product introduction

Introduction:  

1.Overview
F5-4511 Series F5-15XX Converter is a high performance, remote, self-learning 10/100Base-TX or 100/1000Base-FX to E1 protocol converter. This series of products are orientated in the broadband access system for its high-quality, high-stability and low price. This product can convert 10/100Base-TX or 100/1000Base-FX to single E1 line. It provides completed indicators to show the status and alarm messages of the E1 line and Ethernet ports. Its E1 data interface also provides an economical digital access solution for E1 and Fractional E1 network Services, which can work at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches. The main E1 link may be clocked from the recovered receive clock or from an internal oscillator. For easy to check the fault of network line, the device provides local loop selection. It is widely used in LAN connecting, remote monitor and video broadcasting. Furthermore, it can be managed by the software Fi-View-PC. Managed/ unmanaged optional.

2.Hardware Features
 ●Single E1 channels carry 100/1000Base-FX and 10/100Base-T Ethernet data
 ●Comply with ITU-T G.703, G.823 for E1 ports and IEEE802.3u for Ethernet ports
 ●Optical port supports 100 Base-FX mode. Electric ports support 10/100Base-T mode
 ●Ethernet port is in flow control and back pressure mode; support huge packet, up to 1916 bytes (inclusive); carrier sense based backpressure is selected
 ●64Mbits high-speed SDRAM inside used to cache
 ●Filter long/short Ethernet data package and address
 ●E1 channel:HDB3 code, Transparent and Fractional optional, 75/120ohm optional
 ●The timeslots can be selected fractionally
 ●The frame length is from 64 to 2024 byte; support full duplex PAUSE runoff control and Ethernet MIB data statistic
 ●Can select internal clock or recovered clock ; PCM30/ 31 selected
 ●Full LED on panel provides comprehensive indication of device working status
 ●220VAC and -48VDC power supply for standalone are optional
 ●Managed/ unmanaged optional
 ●Provide SNMP, WEB and Console management for the standalone. Viewing and configuring local and remote device easily.

3.Software Features (optional)
 ●Support Console and SNMP management, for Standalone and Chassis
 ●Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version
●View & configure the working status of local chassis and remote standalone device, including E1 status, Optical status
 ●Support remote loop back function
 ●Reset the system or a single module via management software
 ●Reset chassis to factory default
 ●Support online firmware upgraded
 ●Show the detailed information of power supplies, including AC/DC type and working status
 ●Monitoring chassis inside temperature, fans status, and backboard power, and with alarms indication in software
 ●Provide MIB file, make it easy to be integrated into the third-party SNMP management software
 ●Adopt the centralized management style and the tree-view catalogue, which can manage many sets of chassis at the same time in one single window. Meantime, it’s very easy and clear to manage all devices even if many chassis in one window.

4.Typical Application


5.Order Information
Model:
F5-4511, 100Base-TX/FX to 1-8 E1 Protocol Converter Series
P/N:

F5-1518-13-S042CA/D    1 optical port and 1 electric port Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply. Optical port: single mode, 40Km, SC/PC.
F5-1518-33-S042CA/D    1 optical port and 3 electric ports Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply. Optical port: single mode, 40Km, SC/PC.
F5-1518-S042C A/D      1 optical port Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply. Optical port: single mode, 40Km, SC/PC.
F5-1513A/D             1 electric port Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply
F5-1533A/D             3 electric ports Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply
F5-1543A/D             4 electric ports Ethernet to single E1 converter, standalone, 220VAC/-48VDC power supply

For SNMP management and can worked with all of the series listed above.

 

Notice: The P/Ns shown in above table are for 75ohm E1 channels only. Append suffix “-H” for each to represent 120ohm E1 channels. All of the devices listed above support SNMP management, and the manage module is optional.

Copyright © 2015 Beijing Fibridge Co,.Ltd. All Rights reserved
Tel:+86-010-58858988 Fax:+86-010-58858516 E-Mail:steven@fibridge.com