Contact Us
Address:A402, Power Creative Building, No.1, Shangdi East Rd, Haidian District, Beijing, 100085, PR CHINA.
Industrial Switch (PoE)

1 Optical Gigabit and 4 Electric Gigabit PoE Industrial Ethernet Switch

The green switch launched by Beijing Fibridge provides four 1000M Ethernet ports plus 1 gigabit opic port, plug and use. The product archives protection of EMS industrial level 4, effectively resist interference from statics, lightning and impulse; IP40 level, whole metal shell, low consumption design, seismic rail installation, can work in harsh environment -40°C - 85°C. The series is particularly suitable for intelligent transportation, energy, electricity, security and other harsh industrial applications, providing fast , reliable communication connection . This product support 802.3at/af PoE standard,PSE can be used as the power supply to the PDprovide up to 30 watts of power per port.




l IEEE 802.3AF-2003 and 802.3AT-2009 compliant

l Single DC power supply voltage input (45~57V)

l Wide temperature range: -40℃~+85℃

l Supplies 4 independent power ports

l Built-in power FETs

l Continuous system monitoring for every port

l Independent system parameters setting for every port

l Thermal monitoring and protection

l Built-in Power on Reset

l Configurations: (1) 30W x 4 ports

l Built-in LEDs control

l Built-in EEPROM interface for dumb application


Switch Features

MAC Table:  8K

Packet Buffer: 1Mbit

Packet Forwarding Rate: 12.9Mbps

Switching Delay: <5us

bandwidth: 16Gbps

Telecom ports

Fiber Ports:  1 1000Base-X (Combo)

RJ45 Ports:  4 10/100/1000Base-Tx RJ45 ports


Front panel LED

Power LED:  PWR

Interface LED: RJ45(Link&ACT) ,   

Fiber: Combo (Link&ACT)



Power Terminal:   2.0mm DC terminal block

Full load power consumption: < 6.5W

Overload Protection: Support

Reverse Connection Protection: Support

Redundancy Protection: Support

Physical parameters

Housing: Metal, fanless

Protection Class: IP40  

Dimensions : 12cm x 10cm x 4.5cm (W×H×D)

Weight:  0.45kg

Mounting: DIN-Rail or Panel mounting


Industrial standard


FCC CFR47 Part 15, EN55022/CISPR22, Class A


IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)

IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)

IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV

IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)

IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)


Machinery standard


IEC60068-2-6 (Vibration)

IEC60068-2-27 (Shock)

IEC60068-2-32 (Free Fall)






357,000 hrs



1 years



Operating Temperature: -40 to 85°C

Storage Temperature: -40 to 85°C

Ambient Relative Humidity: 5 to 95% (non-condensing)


Copyright © 2015 Beijing Fibridge Co,.Ltd. All Rights reserved
Tel:+86-010-58858988 Fax:+86-010-58858516