Contact Us
Address:A402, Power Creative Building, No.1, Shangdi East Rd, Haidian District, Beijing, 100085, PR CHINA.
Industrial Switch (PoE)

1 Optical 100M and 4 Electric 100M Ports PoE Unmanaged Industrial Ethernet Switch

The green switch launched by Beijing Fibridge provides 4 FE ports plus 1 FX port, plug and use. The full load power is less than 1 watt. The product archives protection of EMS industrial level 3, effectively resist interference from statics, lightning and impulse; IP40 level, whole metal shell, low consumption design, seismic rail installation, can work in harsh environment -40°C - 85°C. The series is particularly suitable for intelligent transportation, energy, electricity, security and other harsh industrial applications, providing fast , reliable communication connection . This product support 802.3at/af PoE standard,PSE can be used as the power supply to the PDprovide up to 30 watts of power per port.



l IEEE 802.3AF-2003 and 802.3AT-2009 compliant

l Single DC power supply voltage input (45~57V)

l Wide temperature range: -40℃~+85℃

l Supplies 4 independent power ports

l Built-in power FETs

l Continuous system monitoring for every port

l Independent system parameters setting for every port

l Thermal monitoring and protection

l Built-in Power on Reset

l Configurations: (1) 30W x 4 ports

l Built-in LEDs control

l Built-in EEPROM interface for dumb application



Switch features

MAC Table:  2K

Packet Buffer: 1M

Packet Forwarding Rate: 0.8Mbps

Switching Delay: <5us


Telecom ports

Fiber Ports: 1 100Base-Fx (FC/SC/ST optional)

RJ45 Ports: 4 10/100Base-Tx RJ45 ports


Front Panel LED

Power LED:  P1 P2

Interface LED: RJ45 (Link&ACT)

Fiber:  F (Link&ACT)



Power Terminal:   5-pin 3.81mm-spacing plug-in terminal block

Full load power consumption:

5port RJ45 <1W   4port RJ-45 + 1port Fiber < 2W

Overload Protection: Support

Reverse Connection Protection: Support Redundancy Protection: Support


Physical Character

Housing: Metal, fanless

Protection Class: IP40  

Dimensions : 25mmx118mmx90mm(W×H×D)

Weight:  0.35kg



Industrial standard

IEC61000-4-2(ESD): ±6kV (contact), ±8kV (air)

IEC61000-4-3(RS): 10V/m (80MHz2GHz)

IEC61000-4-4(EFT): Power Port: ±2kV; Data Port: ±1kV

IEC61000-4-5(Surge): PowerPort: ±1kV/DM, ±2kV/CM; Data Port: ±1kV

IEC61000-4-6(CS): 10V (150kHz80MHz)


Machinery Standard

IEC60068-2-6 (Vibration)

IEC60068-2-27 (Shock)

IEC60068-2-32 (Free Fall)






2093638 hrs





Environment Conditions

Operating Temperature: -40 to 85°C

Storage Temperature: -40 to 85°C

Ambient Relative Humidity: 5 to 95% (non-condensing)

Copyright © 2015 Beijing Fibridge Co,.Ltd. All Rights reserved
Tel:+86-010-58858988 Fax:+86-010-58858516