Contact Us
Address:A402, Power Creative Building, No.1, Shangdi East Rd, Haidian District, Beijing, 100085, PR CHINA
Industrial Switch (PoE)

1 Optical 100M and 1 Electric 100M Industrial Ethernet Switch




1. Overview

1 Optical 100M and 1 Electric 100M Industrial Ethernet Switch with the function of auto negotiation and auto MDI/MDIX cable selection. This device translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. With intelligent SNMP-based network management, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily, and helps network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. Besides, user can control the bandwidth rate limiting as N*32Kbps.

2. Features

2.1. Hardware Features

l Support 10Base-T100Base-TX100Base-FX

l Fully compatible with IEEE802.3IEEE802.3uIEEE802.3x standards

l Up to 120Km distance without any relay device

l High-performance auto-negotiation chips make sure the data transfer with higher security, stability and without block.

l Up to 1916 bytes package forwarded, transmit 802.1Q VLAN TAG protocol transparently

l Support half/full duplex mode Auto-negotiate

l Support Link Loss Forwarding function, informing other end’s UTP port when one end’s UTP is down.

l Support OAM function to transmit management data frames between the local and remote equipment

l All the modules support hot-swap function

l Single-strand/double-strand optical port selectable

l Chassis supports double redundant power supply modules and each power supply module supports up to 100 Watt power output for the security and stability

l Chassis support cascade Link up to 4 numbers for management, 4 chassis need only one IP address.

2.2. Software Function

2.2.1. System

l Support Console, WEB and SNMP-based management

l Select the system or a single local module or remote end device to reset

l Reset chassis to factory default

l Support firmware updating, with the update tool and new version firmware file download from our website.

l Support SNMP management. Set Trap Destination, Community Name, and authority

l Provide MIB file, make it easy to be integrated into the third-party SNMP management software

l Tree-view structure makes it easy to manage many chassis from one software interface

2.2.2. Monitor and Setting

l Show details of system information, including chassis name, location information, IP address, start-up time, software and hardware version

l View & configure the working status of local and remote device, including connection status, speed, half/full duplex mode, port status

l View the detailed information of power supply

l Set the speed(bandwidth) limitation of the Ethernet port from 0Mbps to 70Mbps with step of 32Kbps

l Support remote loop back function, three loop back positions selectable

l Summarize the data flow information and show the communication state of each port

2.2.3. Alarm

l Real-time Alarm can be added to a float window automatically or pop up to get more attention

l One history alarm message window for searching, deleting, copying etc.

2.2.4. Security

l 3 levels of the users to advance the security of the software system

3. Specifications

3.1. Ethernet Port

l Compatible with IEEE 802.3 series Standards

l Speed: 10/100Mbps auto-negotiation

l Duplex: Half/full auto-negotiation

l Connectors: RJ45 Jack

l MDI/MDI-X crossover automatically

3.2. Optical Port

l Wavelength: 850nm/1310nm/1550nm

l Single mode/Multimode Optional

l  Up to 120km transmission distance

l SC/PC, ST/PC and FC/PC optional

3.3. Power

l AC: 100V~240V, 50/60Hz

l DC: -48 VDC

l Consumption: Standalone < 3W

3.4. Size

l Standalone:

132mm (W) × 122mm (D) × 36mm (H)

l 19-inch Chassis:

 440mm (W)×250mmD×125mmH

3.5. Environment

l Operating Temperature: -30 to 70°C

l Storage Temperature: -45 to 85°C;

l Humidity: 30% ~ 90% (25℃);

3.6. LEDs

PWR, TLink, Flink, 100M


4. Order information 

4.1. Model

FB-10/100MMC Media Converter

FB-CHS Chassis

4.2. Part Number of module or standalone media converter 

Note: X should be changed to 1 or 2. When X=1, it means unmanaged converter. When X=2, it means managed converter

FX-M32CA Multi mode converter, Wavelength 1310nm, SC optical connector, Standalone, 220VAC power supply

FX-M31CD Multi mode converter, Wavelength 850nm, SC optical connector, Standalone, -48VDC power supply

FX-S3042CA Single mode converter, Wavelength 1310nm, SC optical connector, Standalone, 40KM, 220VAC power supply

FX-S3082CA Single mode converter, Wavelength 1310nm, SC optical connector, Standalone, 80KM, 220VAC power supply

FX-S3042TM Single mode converter, Wavelength 1310nm, ST optical connector, Module, 40KM

FX-W3042CA Single strand converter, Wavelength 1310nm, SC optical connector, Standalone, 40KM, 220VAC power supply

FX-W3043CA Single strand converter, Wavelength 1550nm, SC optical connector, Standalone, 40KM, 220VAC power supply

FX-W3042CM Single strand converter, Wavelength 1310nm, SC optical connector, Module, 40KM

FX-W3043CM Single strand converter, Wavelength 1550nm, SC optical connector, Module, 40KM

4.3. Part Number (P/N) of Chassis

FC-216  16-slot chassis, support double redundant power supplies

FC-216-M  Management Card of the chassis

4.4. Part Number (P/N) of Chassis power supply module

FP-2100A  16-slot chassis power supply module, AC 220V input, 100Watt output

FP-2100D  16-slot chassis power supply module, DC -48V input, 100Watt output



Copyright © 2015 Beijing Fibridge Co,.Ltd. All Rights reserved
Tel:+86-010-58858988 Fax:+86-010-58858516